airvo high flow set up

Sunday, July 3, 2022 Edit

New target flow setting adjustment item 1 will change the delivered O 2. FP Airvo 2 System.

Pin On Nursing School

High Flow systems are those that can match or exceed the inspiratory flow rate ie 20-30 litresminute.

. A quick guide to setting up Airvo 2. Applicability This document will be used. The myAIRVO 2 is for.

Dependent on the required FiO2 and the flow rate specific for the patient the. SETTING UP AIRVO 2 1. AIRVO 2 Set-up Guide 000MB.

The flow may be from 2 - 60Lmin depending on the patient interface. This includes patients who have had upper airways bypassed. The standard High Flow TMtherapy set up for AIRVO 2 has two wall flow meters 0-15 and 0-70 Litresmin maximal flow.

High Flow Nasal Therapy system 21. Target flow setting is adjusted. SETTING UP AIRVO 2 1.

BEFORE YOU BEGIN The AIRVO 2 should be fixed on a pole mounting tray 900PT405 below patient head height. Setting up AIRVO 2 5JQ 6TF UIF 23 DPEF BU UIF CPUUPN PG UIF QBHF UP WJFX WJEFPT DPWFSJOH TFUVQ VTF BOE SFQSPDFTTJOH Install water chamber. The purpose of this document is to detail the delivery of high flow nasal oxygen therapy.

Please see your myAIRVO 2 User Manual for information about ﬂ ow ranges for your interface. Open the packaging of the tube chamber. Associated Documents 7.

If you are new or want to learn more complete the Airvo 2 Basics course. The AIRVO 2 is a humidifier with integrated flow generator that delivers high flow warmed and humidified respiratory gases to spontaneously breathing patients through a variety of patient interfaces. Optiflow Nasal High Flow therapy.

BEFORE YOU BEGIN The AIRVO 2 should be fixed on a pole mounting tray 900PT405 below patient head height. Setting up Airvo 2. Setting up the Airvo 2 5.

Part 2 of the AIRVO 2 video is a step-by-step guide to setting up the AIRVO 2 and an introduction to our range of interfaces. SETTING UP ARVO 2 BEFORE YOU BEGIN The AIRVO 2 should be fixed on a pole mounting tray 900PT405 below the patient head height. Airvo 2 Basics Course 15 minutes You must be logged in to start this course Log In or sign up People who complete this course will gain a basic understanding of how to set up Airvo 2.

The device may be set from 2 60 Lminute depending on the interface and delivers a flow of gas that has high levels of humidity which aids patient comfort and can enhance mucociliary clearance of. Purpose To ensure the appropriate and safe use of Nasal High Flow therapy with or without oxygen via Airvo 2. System which delivers heated humidified high flow oxygen therapy via nasal cannula or tracheostomy attachment.

Available target settings Turn Off Cleaning and disinfection. If using large bore tubing please refer to Dry Side of the Humidiﬁer set up. High flow warmed and humidified respiratory gases.

The Airvo 2 is a system to deliver Optiflow Nasal High Flow NHF therapy. Find clinical evidence and practice. Learn more here httpswwwfp.

Trainee is able to. Open the packaging of the tube chamber kit heated. DayNight Mode Use the Up and.

If required adjust the O 2 item 2. 1 2 3 03 Paediatric Nasal High Flow Press the onoff button on the Aerogen Controller for 1 second to select 30 minute. Connect the high flow nasal cannula to the other end of the heated breathing tube Switch on the unit by holding down the power button Arrow 6 Ensure the Airvo has been decontaminated This.

Open the packaging of the tube chamber kit heated. Use the Up and Down buttons to select your ﬂ ow rate from 10-60 Lmin. Guidelines for High Flow Oxygen Therapy HFNO² on the Wards Page 4 of 13 1.

Pin On Nursing School